Allen-Bradley ETAP2F是一種工業以太網網絡組件，具有一(1)個銅質端口和兩(2)個光纖接口，支持10/100 Mbps通信速度。它也可用于encompass合作伙伴模塊以及非Allen-Bradley和第三方產品。

1783-ETAP2F的單銅端口支持10/100 Mbps自動協商功能，支持全雙工或半雙工模式。1783-ETAP2F的雙光纖端口同樣能夠?qū)崿F(xiàn)10/100 Mbps的通信速度，支持更長的通信距離，因此對噪聲和電氣干擾的敏感度更高。

1783-ETAP2F不安裝在任何背板上，也不從中吸取電流。它由外部電源供電，輸入電壓范圍為20.4至27.6伏DC，標稱輸入電壓為24伏直流電。該以太網設備可以使用DIN導軌支架安裝，也可以直接安裝在外殼板上。它能夠水平和垂直安裝，提供了安裝的靈活性。該設備占用最小的面板空間，但是必須遵循特定的安裝間隙，以確保正確操作和連接質量。這些間隙包括7.62厘米（3英寸。）的空間和2.54厘米（1英寸。）的空間。對于光纜入口，建議至少5.08厘米或2英寸，以符合光纜的必要彎曲半徑。

Allen-Bradley 1783-ETAP2F分路器是一款以太網/IP分路器，具有1個銅纜端口和2個光纖端口。光纖收發器類型為100Base-FX IEEE 802.3u收發器。光學波長為1310納米。啟動時，62.5/125微米光纖中的最小發射機發射功率為-19 dBm，50/125微米光纖中的最小發射機發射功率為-22.5 dBm。和接收器靈敏度水平為-31.8 dBm和-14 dBm。62.5/125微米多模光纖在額定BET下的光纖信道功率預算為12.8 dB，50/125微米多模光纖為9.3 dB。連接器類型為IEC 61754-20 LC連接器，每個連接的插入損耗為0.75 dB。通道長度為2公里。

1783-ETAP2F抽頭在24伏DC下的電流消耗為260毫安。DC電壓輸入的額定值為24伏DC。功耗為6.24瓦，功耗為6.24瓦。1783-ETAP2F抽頭的外殼是打開的。1783-ETAP2F水龍頭的工作溫度范圍為-25至60攝氏度，儲存溫度范圍為-40至85攝氏度。相對濕度范圍為5至95%。1783-ETAP2F抽頭的非運行和運行沖擊額定值分別為50 G和30 G。該設備在10至500赫茲時的額定振動為5 G。1783-ETAP2F tap具有排放等級。此外，它的額定空氣放電電壓為8千伏，接觸放電電壓為6千伏。1783-ETAP2F tap通過了CE、C-Tick、Ex和KC認證

The Allen-Bradley ETAP2F is an industrial Ethernet networking component that features One (1) Copper Ports and Two (2) Fiber Optic interfaces supporting 10/100 Mbps communication speed. It may also be used with encompass partner modules as well as non-Allen-Bradley and 3rd party products.

The single copper port of the 1783-ETAP2F is capable for 10/100 Mbps with auto-negotiating capability and supports operation in full or half duplex modes. The dual fiber optic ports of the 1783-ETAP2F is similarly capable of 10/100 Mbps communication speed with support for longer communication distance that exhibits increased susceptibility to noise and disturbances of electrical nature.

The 1783-ETAP2F does not install to any backplane nor does not draw current from it. It is supplied externally by a power supply with input voltage range of 20.4…27.6V DC with a nominal input voltage of 24VDC. This Ethernet device can be installed using a DIN rail mount or directly mounted to an enclosure plate. It is capable of horizontal and vertical mounting, providing flexibility of installation. This device occupies minimum panel space however, specific installation clearance must be followed to ensure proper operation and quality of connection. These clearances include 7.62 cm (3 in.) of space on the bottom of the tap and 2.54 cm (1 in.) of space on the remaining sides of the tap. For Fiber cable entry, at least 5.08 cm or 2 inches is recommended to comply with the necessary bending radius of the Fiber Optic cable.

The Allen-Bradley 1783-ETAP2F tap is an Ethernet/IP tap with 1 copper port and 2 fiber ports. The Fiber transceiver type is the 100Base-FX IEEE 802.3u transceiver. The optical wavelength is 1310 nanometers. The minimum transmitter launch power at startup is -19 dBm into 62.5/125 micrometer fiber and -22.5 dBm into 50/125 micrometer fiber. The minimum and maximum receiver sensitivity levels are -31.8 dBm and -14 dBm. The fiber channel power budget at the rated BET is 12.8 dB for 62.5/125 micrometer multimode fiber and 9.3 dB for 50/125 micrometer multimode fiber. The connector type is the IEC 61754-20 LC connector with a maximum insertion loss of 0.75 dB per connection. The maximum channel length is 2 kilometers.

The maximum current consumption for the 1783-ETAP2F tap is 260 milliamps at 24 Volts DC. The rating for the DC voltage input is 24 Volts DC. The maximum power consumption is 6.24 Watts and the maximum power dissipation is 6.24 Watts. The enclosure of the 1783-ETAP2F tap is open. The operating temperature range for the 1783-ETAP2F tap is -25 to 60 degrees Celsius and the storage temperature range is -40 to 85 degrees Celsius. The relative humidity range is 5 to 95%. The non-operating and operating shock ratings for the 1783-ETAP2F tap are 50 G and 30 G, respectively. The vibration rating for the device is 5 G at 10 to 500 Hertz. The 1783-ETAP2F tap has a Class A emissions rating. Furthermore, it is rated for 8 kilovolts of air discharges and 6 kilovolts of contact discharges. The 1783-ETAP2F tap is certified by the CE, C-Tick, Ex, and KC

standards.